Control System Design Guide Using Your Computer to Understand aFeedback Controllers 4th Edition by George Ellis 0123859212 9780123859204 9780123859211

Control System Design Guide Using Your Computer to Understand aFeedback Controllers 4th Edition by George Ellis – Ebook PDF Instand Download/DeliveryISBN: 0123859212, 9780123859204, 9780123859211
Full dowload Control System Design Guide Using Your Computer to Understand aFeedback Controllers 4th edition after payment

Product details:

ISBN-10 ‏ : ‎ 0123859212 

ISBN-13 ‏ : ‎ 9780123859204, 9780123859211

Author: George Ellis

Control Systems Design Guide has helped thousands of engineers to improve machine performance. This fourth edition of the practical guide has been updated with cutting-edge control design scenarios, models and simulations enabling apps from battlebots to solar collectors.

This useful reference enhances coverage of practical applications via the inclusion of new control system models, troubleshooting tips, and expanded coverage of complex systems requirements, such as increased speed, precision and remote capabilities, bridging the gap between the complex, math-heavy control theory taught in formal courses, and the efficient implementation required in real industry settings.

Control System Design Guide Using Your Computer to Understand aFeedback Controllers 4th Table of contents:

Section I – Applied Principles of Controls
Chapter 1 – Introduction to Controls
1.1 Visual ModelQ Simulation Environment
1.2 The Control System
1.3 The Controls Engineer
Chapter 2 – The Frequency Domain
2.1 The Laplace Transform
2.2 Transfer Functions
2.3 Examples of Transfer Functions
2.4 Block Diagrams
2.5 Phase and Gain
2.6 Measuring Performance
2.7 Questions
Chapter 3 – Tuning a Control System
3.1 Closing Loops
3.2 A Detailed Review of the Model
3.3 The Open-Loop Method
3.4 Margins of Stability
3.5 A Zone-Based Tuning Procedure
3.6 Variation in Plant Gain
3.7 Multiple (Cascaded) Loops
3.8 Power Converter Saturation and Synchronization
3.9 Phase vs. Gain Plots
3.10 Questions
Chapter 4 – Delay in Digital Controllers
4.1 How Sampling Works
4.2 Sources of Delay in Digital Systems
4.3 Experiment 4A: Understanding Delay in Digital Control
4.4 Selecting the Sample Time
4.5 Questions
Chapter 5 – The z-Domain
5.1 Introduction to the z-Domain
5.2 z Phasors
5.3 Aliasing
5.4 Experiment 5A: Aliasing
5.5 From Transfer Function to Algorithm
5.6 Functions for Digital Systems
5.7 Reducing the Calculation Delay
5.8 Quantization
5.9. Questions
Chapter 6 – Four Types of Controllers
6.1 Tuning in this Chapter
6.2 Using the Proportional Gain
6.3 Using the Integral Gain
6.4 Using the Differential Gain
6.5 PD Control
6.6 Choosing the Controller
6.7 Experiments 6A–6D
6.8 Questions
Chapter 7 – Disturbance Response
7.1 Disturbances
7.2 Disturbance Response of a Velocity Controller
7.3 Disturbance Decoupling
7.4 Questions
Chapter 8 – Feed-Forward
8.1 Plant-Based Feed-Forward
8.2 Feed-Forward and the Power Converter
8.3 Delaying the Command Signal
8.4 Variation in Plant and Power Converter Operation
8.5 Feed-Forward for the Double-Integrating Plant
8.6 Questions
Chapter 9 – Filters in Control Systems
9.1 Filters in Control Systems
9.2 Filter Passband
9.3 Implementation of Filters
9.4 Questions
Chapter 10 – Introduction to Observers in Control Systems
10.1 Overview of Observers
10.2 Experiments 10A–10C: Enhancing Stability with an Observer
10.3 Filter Form of the Luenberger Observer
10.4 Designing a Luenberger Observer
10.5 Introduction to Tuning an Observer Compensator
10.6 Questions
Section II – Modeling
Chapter 11 – Introduction to Modeling
11.1 What is a Model?
11.2 Frequency-Domain Modeling
11.3 Time-Domain Modeling
11.4 Questions
Chapter 12 – Nonlinear Behavior and Time Variation
12.1 LTI Versus Non-LTI
12.2 Non-LTI Behavior
12.3 Dealing with Nonlinear Behavior
12.4 Ten Examples of Nonlinear Behavior
12.5 Questions
Chapter 13 – Model Development and Verification
13.1 Seven-Step Process to Develop a Model
13.2 From Simulation to Deployment: RCP and HIL
Section III – Motion Control
Chapter 14 – Encoders and Resolvers
14.1 Accuracy, Resolution, and Response
14.2 Encoders
14.3 Resolvers
14.4 Position Resolution, Velocity Estimation, and Noise
14.5 Alternatives for Increasing Resolution
14.6 Cyclic Error and Torque/Velocity Ripple
14.7 Experiment 14B: Cyclical Errors and Torque Ripple
14.8 Choosing a Feedback Device
14.9 Questions
Chapter 15 – Basics of the Electric Servomotor and Drive
15.1 Definition of a Drive
15.2 Definition of a Servo System
15.3 Basic Magnetics
15.4 Electric Servomotors
15.5 Permanent-Magnet (PM) Brush Motors
15.6 Brushless PM Motors
15.7 Six-Step Control of Brushless PM Motor
15.8 Induction and Reluctance Motors
15.9 Questions
Chapter 16 – Compliance and Resonance
16.1 Equations of Resonance
16.2 Tuned Resonance vs. Inertial-Reduction Instability
16.3 Curing Resonance
16.4 Questions
Chapter 17 – Position-Control Loops
17.1 P/PI Position Control
17.2 PI/P Position Control
17.3 PID Position Control
17.4 Comparison of Position Loops
17.5 Position Profile Generation
17.6 Bode Plots for Positioning Systems
17.7 Questions
Chapter 18 – Using the Luenberger Observer in Motion Control
18.1 Applications Likely to Benefit from Observers
18.2 Observing Velocity to Reduce Phase Lag
18.3 Acceleration Feedback
18.4 Questions
Chapter 19 – Rapid Control Prototyping (RCP) for a Motion System1
19.1 Why Use RCP?
19.2 Servo System with Rigidly-Coupled Load
19.3 Servo System with Compliantly-Coupled Load

People also search for Control System Design Guide Using Your Computer to Understand aFeedback Controllers 4th:

control system design guide pdf
    
control system design guide
    
control system design guide george ellis pdf
    
control system design goodwin pdf
    
control system design example